Spend your time on what matters most to your design.
With time pressures and the need for trusted results, PSIM’s F28004x Target lets you test and troubleshoot control algorithms and generate ready-to-run C code automatically. The DSP Oscilloscope gives you real-time control and waveform display.
With SimCoder and the F28004x Target, debug and validate a control algorithm thoroughly in PSIM, and from the control schematic, generate ready-to-run C code for Texas Instruments’ F28004x series floating-point MCU.
The F28004x Target allows you to spend your time testing and troubleshooting control algorithms and hardware, instead of studying datasheets to determine details like which bits in a register need to be set so that your ADC is triggered at the beginning of a PWM duty cycle.
The generated code will work with any DSP hardware board as long as the board uses the F28004x series DSP.
PSIM supports code generation for both the single-core ‘S’ and dual-core ‘D’ variants. When generating code for the ‘D’ variant you need two PSIM schematics to generate code for either MCU.
Explore the Hardware Target Library
The F28004x Target library includes elements for the following DSP functions:
- A/D converter
- D/A converter
- Digital inputs and outputs
- Encoder and counter
- SCI interface
- SPI interface
- CAN bus communications
- Comparator inputs
- Interrupts including trip-zone and capture
- Clock frequency selection
- State Machines
- PWM generator, with phase shift, variable frequency, and peak current mode control
Easily test, debug and modify the DSP code in a non-disruptive and non-intrusive way.
Based on the SCI interface, PSIM provides the DSP Oscilloscope function that can display the real-time waveforms of the variables inside the DSP. The DSP Oscilloscope also provides the capability to modify the value of runtime variables during real-time system operation of the physical hardware.
DSP Oscilloscope and C-Code Generation
Use the DSP oscilloscope to identify internal process variables of the DSP to be monitored in the PSIM schematic. When the control schematic is translated into c-code using PSIM, the necessary code will be automatically setup so that these variables can be monitored using the DSP Oscilloscope interface in real-time.
Simply select and trigger on the signals as you would in a standard oscilloscope.
Features & Benefits
F28004x Target Resources
See what you can achieve with the F28004x Target. Find more inspiration here.
Suggested development products from Texas Instruments:
"“OEM Power Systems (OEM) is a designer and manufacturer of power systems, such as AC and DC motors, drives, and generator controls, among others. Although it creates these systems primarily for the…" Read More ›